March 2012 Newsletter is Posted

Posted March 14th, 2012 by   |  Photography, Software, Workshops  |  Permalink

The March 2012 Out There Images newsletter is posted!


News this month:

– D800 or D4?
– Two openings for Galapagos
– Two New Books Shipping This Month
– Book Giveaway
– Stuff I Like This Month
– February GOAL Assignment: Purposeful Distortion
– March GOAL Assignment: Walking Zoom
– Digital Tidbits: What Camera Settings Affect RAW?
– Book Review: Ten Photo Assignments to develop your photographic skills
– Workshop and Business Updates


Converting JPG to RAW?

Posted May 9th, 2011 by   |  Photography, Software  |  Permalink

Yes, that’s right. Convert JPG to RAW.

In my workshops, I show how it is possible to do this using Nikon Capture NX2 as well other software packages such as Lightroom and Aperture. I want to state up front that what I describe here isn’t truly creating a RAW file from a JPG. Rather, it is converting the JPG into a file that allows you to make nondestructive changes to it. Fundamentally, what you are doing is taking a JPG, which is a lossy file format, and bringing it into a new architecture that makes it a lossless format.

After you convert the JPG into a RAW, it still remains at 8-bits per color channel, versus 12 bit, 14 bit or 16 bit per color channel for RAW files. Also, even though this conversion doesn’t allow all the flexibility of RAW files such as white balance, it is still a worthwhile process because you’ll be able to make all kinds of changes to the image without recompressing it each time you save your changes.

How it Works
I use Nikon Capture NX2 and Adobe Lightroom in my workflow, so I’ll talk about both of them here.

In the case of Nikon Capture NX2, open up a JPG photo that was taken by any camera. Make any changes you want to it such as New Steps, Color Control Points, Hue, Saturation, Nik Color Efex Pro filters or anything else. Then, save the file as a NEF/NRW. The acronym NEF stands for Nikon Electronic Format and NRW stands for Nikon Raw.


Use the pull-down menu to choose NEF | NRW.

This action takes the JPG and then writes the settings into an instruction set that only Nikon Capture NX2 can read. If you open the image in Nikon Capture NX2 in the future, then you can change or modify all the adjustments previously make inside NX2. If you want to remove an adjustment or even perhaps convert the image to black and white, then you simply make those changes with no detrimental effects on the image. After you are finished working on the image, if you save it again as a NEF, then the save is nondestructive. You don’t degrade the original JPG image because you are actually just saving instructions for Capture NX2 to read.

In the case of this image, I added three adjustments in Nikon Capture NX2. You can see them on the right side: Retouch Brush, XYZ, and XYZ. By saving the image in the NEF|NRW format, I can come back in the future to make any further changes I'd like.

In the case of this image, I added three adjustments in Nikon Capture NX2. You can see them on the right side: Retouch Brush, Classical Soft Focus, and Brilliance/Warmth. By saving the image in the NEF|NRW format, I can come back in the future to make any further changes I'd like.

Lightroom (and Aperture) work in a similar, but slightly different way. If you import a JPG image into Lightroom, then make a bunch of changes, it saves the instruction set with the original JPG as a sidecar file. This sidecar is called an XMP file and all the instructions are encoded here for future use in Lightroom.

What I described above does not apply to Photoshop. For example, let’s say you open a JPG in Photoshop and make changes to it. If you save that JPG over itself, then the changes are applied directly to the file AND you will recompress the data. Therefore, this action is a “lossy” save and will degrade your image (albeit slightly) over time. My recommendation for working in Photoshop is to use the Save As command so you keep your original JPG untouched.

One more point I want to make here regarding this idea of converting your JPG into a “RAW” file. This conversion is only visible inside the original host program. In other words, if you convert your JPG into a NEF inside Nikon Capture NX2, then try to open your new NEF inside Lightroom, you won’t see any of your NX2 changes. This is because Lightroom uses different instruction sets than NX2. In fact, neither program can use the other program’s instructions. Kind of a bummer, but that’s the current reality.

Corrupted Files on MacBook Pro, Nikon Cameras and eSATA Drive

Posted January 6th, 2011 by   |  Photography, Software  |  Permalink
Corrupted image file.

Corrupted image file.

Over the last month, I’ve been having all kinds of problems with corrupted photographs. I first noticed it after I returned from a big workshop I ran in September, 2011 in the Olympic NP, WA. I found that a few NEF pictures had a vertical line through them and that half of the image had shifted “up” by a few pixels. At first, I assumed the problem was with the CF card I was using, so I took that card out of my photo bag just in case it was bad.

This was the first image where I first noticed the data corruption. See how the right side of the file is shifted "up" from the left side?

This was the first image where I first noticed the data corruption. See how one side of the file is shifted "up" from the other side?

A few weeks later, I found the problem again. However, this time it was on a JPG. Then, the problem started to get much worse. I found that approximately 5% of my photos appeared corrupted no matter what camera body or memory card combination I used.

More data corruption on a Nikon JPG file. Looks kinda like the Matrix.

More data corruption on a Nikon JPG file. Looks kinda like the Matrix.

So, I started testing to see if I could figure out where the problem originated. First check was my cameras. I never saw any corrupted files on the LCD panel of my Nikon Cameras, so felt that these weren’t issue.

Next was to see if it was a specific CF card. I had corrupted files from all of my CF cards, so it wasn’t a single card problem.

Next was to determine if it was a software issue. My workflow is to ingest my files through Photo Mechanic where I then add copyright and keyword metadata. I ran a test where I brought the photos into my external disk drive through Photo Mechanic and then a separate test where I moved them manually through drag and drop. In both cases, I had corrupted files. Hmm.

Next was to determine if the problem was with my card reader. I use a Lexar Pro CF/SD UDMA card reader and I had heard that there are some incompatibilities between certain card readers and Mac computers. So, to eliminate this as a cause, I moved files to my external drive with the card reader and then again with a direct USB connection to my Nikon D700. In both cases, I had corrupted files.

Ok, at this point, it was clear that the problem wasn’t:
– Camera
– Card
– Software
– Card reader

I began to suspect that the problem might be my external disk drive. I’m currently downloading images directly to an OWC 2TB Mercury Elite Pro Quad interface external disk drive. This drive allows me to connect it to the computer via one of four methods: USB, Firewire 400, Firewire 800 or eSATA. My standard protocol is to keep it connected to my MacBook Pro via eSATA. I use an eSATA Express 34mm adapter that plugs into my Mac.

The next series of tests was to download files to my computer’s desktop and then do another download to my external hard drive. The files downloaded to my computer desktop via USB card reader had zero corrupted files. The same files downloaded to the external drive via eSATA connection had two corrupted images. Aha! It was looking like it might be my external hard drive.

It took one more test to get to the bottom of the problem. I connected the same hard drive to my computer via USB (rather than eSATA) and did the download test one more time. This time, I had zero corrupted files.

I called OWC (Other World Computing and told them my predicament. They immediately said that there was a specific incompatibility with my Express 34mm eSATA adapter and the model of MacBook Pro that I use. For some reason, the chipset for MacBook Pro 5, 1 (five comma one) has problems with some models of Express 34 eSATA cards. OWC said that they would replace my eSATA card with a new one and I’d be up and running within a week.

What a relief. It is really hard to be a professional photographer when you can’t trust your tools. Knowing that I might or might not get corrupted files from any of my cameras at any time, really put the damper on my photography. The kind people at OWC were wonderful to work with. I also talked a bit with Photo Mechanic ( and they were extremely helpful in helping to troubleshoot the problem.

Now, I’m still using the external hard drive, but I have it connected via USB or Firewire. Once the new eSATA adapter arrives, I’ll go back to high-speed data transfer.

© 2020 Visual Adventures | Site Policies | Web by Works Development